-
BMW N20/N26 Turbocharger (Remanufactured)We gave this turbocharger a complete overhaul with new bearings, and internal gaskets to ensure you get a long lasting replacement. This turbo is a direct-fit replacement and offers a reliable option for a fraction of the dealer pricing. Comes with our 1 year...
$750.00 USD $750.00 USD - Unit price
- per
-
N54 STG 2 Turbocharger SETTPC N54 upgraded turbochargers with a TD04 turbine wheel and larger AR turbine housings for more top end than traditional upgraded turbos using OEM sized turbine housings. We also use a 19T compressor wheel for as much power as possible out of the OEM...
$2,299.00 USD $0.00 USD $2,299.00 USD - Unit price
- per
-
Waste Gate Repair and Bushing Replacement ServiceThe infamous waste gate rattle sound cannot go unnoticed. It becomes a nuisance to you and the performance of your vehicle and will eventually make your engine go into "limp mode" aka "low boost". If this happens to your car we can help. The worn...
- From
$400.00 USD $300.00 USD - From
$400.00 USD - Unit price
- per
- From
-
TPC N55 STG 2 Performance TurbochargerTPC has developed a Stage 2 turbo that directly competes with the performance of the well-known Pure Stage 2 without the hefty price tag. Attached bellow is our Stage 2 dyno graphs on MS109 race fuel which made a consistent powerband with 530whp. The...
$1,999.00 USD $1,999.00 USD - Unit price
- per
-
BMW N55 3.0L Turbocharger (Remanufactured)This is a remanufactured original Borg Warner turbocharger for BMW models fitted with the 3.0L N55 engines. We disassembled the whole turbocharger and installed new bearings, New oil seals and New internal gaskets to ensure you get a quality rebuilt unit to replace your...
$899.00 USD $899.00 USD - Unit price
- per
-
BMW N54 OIL FEED & DRAIN LINE KITTPC now offers a replacement oil line kit to replace your original lines! N54's are notorious for having oiling issues so we highly recommend changing your oil feed and drain lines to ensure your new or remanufactured turbochargers get the necessary oil for optimal...
$225.00 USD $225.00 USD - Unit price
- per
-
BMW N54 GASKET KIT (SET)TPC offers a gasket kit for the BMW N54 engine. Kit includes 2 sets of gaskets for the twin turbo N54's. For single side gasket purchase, please reach out to us for a custom billing. KIT INCLUDES: (2x) Down pipe gasket (6x) Header to turbo gaskets...
$135.00 USD $135.00 USD - Unit price
- per
-
BMW N55 PNEUMATIC WASTEGATE ACTUATORTPC offers a new pneumatic wastegate actuator for N55 BMWs. We do not offer an electronic N55 option at this time.
$185.00 USD $185.00 USD - Unit price
- per
-
Base Turbocharger Remanufacturing ServiceTPC Inc BASE Turbo Remanufacturing Service BASE Turbocharger Remanufacturing Service includes (but not limited to) * New Turbine Shaft * New Internal precision parts replacement ( **Does not include new ball bearing cartridge for ball bearing application turbos. New cartridge is extra**) * Full...
$650.00 USD $650.00 USD - Unit price
- per
-
BMW N54 Turbocharger Set (Remanufactured)Does your N54 equipped car have turbos that are leaking oil? Making noise? Rattling wastegate? We can rebuild your turbos and repair the wastegates for you and have your car running as good as new. Rebuild includes new center housing rotating assembly and wastegate...
$1,399.00 USD $1,399.00 USD - Unit price
- per
-
BMW N54 OIL FEED LINE KITTPC now offers a replacement oil feed line kit to replace your original lines! N54's are notorious for having oiling issues so we highly recommend changing your oil feed lines to ensure your new or remanufactured turbochargers get the necessary oil for optimal reliability....
$120.00 USD $120.00 USD - Unit price
- per
-
BMW/MINI B48A20O1 Turbocharger (Remanufactured)TPC now offers a quality remanufactured turbocharger for newer BMW X1/X2 and MINI Cooper/Countryman models with the B48A20O1 2.0L engine. Built using OEM cores and quality made parts from the UK, high speed balanced in house, to a higher spec than OEM assures you...
$749.00 USD $749.00 USD - Unit price
- per
-
BMW N20 WASTEGATE ACTUATORSTPC can now offer you a replacement wastegate actuator for your N20. We offer the pneumatic and electronic actuators. Please confirm which style your turbocharger and the Model and Year you have before ordering. These items are non returnable
- From
$124.99 USD - From
$124.99 USD - Unit price
- per
- From
-
NEW BMW N20 TurbochargerThis turbo is a direct-fit replacement and offers functionally the same warranty and product that you would receive from a dealer but is offered here at a significant savings over the dealer price. Please choose the appropriate wastegate option (pneumatic or electronic) and include...
$1,049.00 USD $1,049.00 USD - Unit price
- per
-
BMW N63 Turbocharger Set (N63B44O2 TU2) (Remanufactured)We completely overhauled these units to ensure all specifications are present and replaced all the bearings, seals and internal gaskets to ensure another long service life. We also perform our wastegate repairs to prevent wastegate rattle. Left and right side are the exact same...
$1,599.00 USD $1,599.00 USD - Unit price
- per
-
BMW S55 Turbocharger Set (Remanufactured)TPC now offers rebuilt turbos for your S55 equipped BMW. Built using high quality parts made in the UK and high speed balanced in house on our VSR machine. Electronic Actuator NOT included. OEM Part Number FRONT CYL 1-3: 7850278 / 11657 849...
$1,250.00 USD $1,250.00 USD - Unit price
- per
-
BMW N63 Turbocharger Set (N63B44O0) (Remanufactured)We completely overhauled these units to ensure all specifications are present and replaced all the bearings, seals and internal gaskets to ensure another long service life. We also perform our wastegate repairs to prevent wastegate rattle. Left and right side are the exact same...
$1,599.00 USD $1,599.00 USD - Unit price
- per
-
TPC Custom BMW F10/F90 Upgraded Turbine WheelTPC now offers our custom made turbine wheel upgrade from our F10/F90 STG2 hybrid turbocharger. This upgraded turbine features a reverse 49mm 9 blade head with the OEM GT15 shaft specs for a great hybrid turbocharger. Our STG 2 F10 & F90 hybrid turbochargers...
$175.00 USD $175.00 USD - Unit price
- per
-
TPC Custom BMW N55 Upgraded Turbine WheelTPC now offers our custom made turbine wheel upgrade from our N55 STG2 hybrid turbocharger. This wheel comes pre balanced with the appropriate shaft nut. This upgraded turbine features a reverse 59mm 9 blade head with the OEM B03 shaft specs for a great...
$185.00 USD $185.00 USD - Unit price
- per
-
BMW 2.0L B48 Turbocharger (Remanufactured)TPC is proud to offer a remanufactured turbo for the 2.0L B48 Engines. Professionally remanufactured with full wastegate bushing replacement for ultimate reliability! Electronic Actuator NOT included. We recommend reusing your actuator or buying a new one from the dealer. Shop pricing available. ...
$799.00 USD $799.00 USD - Unit price
- per
-
BMW original B58 Gen 1 (6 Port) turbochargerRemanufactured OEM Turbocharger for B58 Engines now available. OEM Part Number 11658637041 / Compressor Wheel OEM Turbine Wheel OEM Bearing Type Options Journal Bearing Engine B58 Gen 1 Turbocharger Upgrades NO Potential Power OEM Install Hardware Included NO VSR Balanced YES Applications Slip...
$0.00 USD $0.00 USD - Unit price
- per
-
BMW N20/N26 OIL FEED LINE KITNew upgraded oil feed line kit includes the following: (1x) Steel braded oil feed line (4an) (1x) Block fitting (1x) Turbo oil inlet fitting (1x) Banjo bolt with crush washers Applications: BMW N20/N26 Engine 13-17 320 14-16 228 12-16 328 14-16 428 12-15 528...
$75.00 USD $75.00 USD - Unit price
- per
-
TPC B58 Stage 2 Hybrid Turbocharger (Gen 3, 6 Port)TPC is proud to offer a reliable Stage 2 Hybrid for the B58 platform. All turbos are machined and built in house to ensure superior quality control and competitive pricing. This upgrade is also available for the 2 port model. **Customers with dyno sheet...
$1,799.00 USD $1,799.00 USD - Unit price
- per
-
B58 Stage 2 Hybrid Turbocharger (2 Port, Gen 1 )TPC is proud to offer a reliable Stage 2 Hybrid for the B58 platform. All turbos are machined and built in house to ensure superior quality control and competitive pricing. This upgrade is also available for the 6 port models. **Customers with dyno sheet...
$1,999.00 USD $1,999.00 USD - Unit price
- per
-
TPC S55 M2/M3/M4 Stage 3 Hybrid Turbocharger SETTPC Stage 3 S55 700WHP capable turbos are fully built, upgraded and machined in house. There is simply no room for bigger wheels in the stock housings. Stop looking around for the next best thing because you just found it here. We aim to...
$2,999.00 USD $2,999.00 USD - Unit price
- per
-
TPC F90 M5 Stage 2 Hybrid Turbocharger SETTPC Stage 2 F90 M5 Hybrid Turbocharger Our goal with all turbocharger upgrades is to keep the great response from the factory by keeping the original TWIN SCROLL turbine housings that helps to achieve great spool times. TPC now offers something that nobody else...
- From
$3,499.00 USD - From
$3,499.00 USD - Unit price
- per
- From
-
BMW N63 1st gen upgraded CHRA 2009-2012These are drop in CHRA replacement for your 1st generation N63 engine. Our new wheel aero makes for the turbos to have a bit more pep as they are more efficient than the original wheels. In stock ready to ship! High Speed balanced in...
$649.00 USD $649.00 USD - Unit price
- per
-
Turbocharger Upgrade ServiceTPC Inc. main focus is building around the “Bolt On” configuration that comes from factory mounted turbos. But we can rebuild and upgrade almost any aftermarket performance turbocharger as well. Turbo Parts Canada can upgrade any factory MHI TD04, TD05, TD06, Borg Warner series, K03,...
- From
$400.00 USD - From
$400.00 USD - Unit price
- per
- From
-
BMW N20/N26 Performance TurbochargerTPC is proud to introduce the Full N20/N26 turbocharger upgrade. Other well known manufacturers only upgrade the compressor wheel and leave the turbine wheel untouched... The turbine wheel is crucial to help keep the powerband going strong in the upper RPM's. If turbine wheel...
$1,430.00 USD $1,430.00 USD - Unit price
- per
TPC6466X
The TPC6462X turbo has gone 8sec in a manual bolt-on DSM .63 flange turbo at 45psi! The compressor wheel is inspired from XONA and measures 64x86 mm. This 6466X unit is now paired with the standard 66mm PTE turbine wheel and is capable of...
- From
$1,499.00 USD - From
$1,499.00 USD - Unit price
- per
TPC6466G
For the Garrett fans that wish there was a compressor wheel to fill the gap between the G-900 62x76 and the G-1050 68x84, TPC has made a custom one just for you. Using the same geometry we have made a 64x82 to give you...
- From
$1,250.00 USD - From
$1,250.00 USD - Unit price
- per
TPC6262
TPC6262 Performance Turbocharger The compressor wheel in this turbo is based off the new Garrett 9 blade G35-900 compressor wheel which measures 62x76 mm that is paired with a 9 blade 62mm GT turbine wheel and capable of achieving 600-700whp with ease. A T51R...
- From
$1,250.00 USD - From
$1,250.00 USD - Unit price
- per
Mercedes 300 Series Turbocharger (M274 Engine)
TPC offers you a quality genuine alternative to an expensive new turbo from the dealer for your M274 equipped Mercedes engines. Please contact us if you are unsure as to which style your car is equipped with. Does not include gaskets. OEM Part...
$1,399.00 USD $1,399.00 USD - Unit price
- per
TPC6462X
The TPC6462X turbo has gone 8sec in a manual bolt-on DSM .63 flange turbo at 45psi! The compressor wheel is inspired from XONA and measures 64x86 mm. This unit is paired with the standard 62mm GT35 turbine wheel and capable of achieving 700-800whp with...
- From
$1,250.00 USD - From
$1,250.00 USD - Unit price
- per
- Choosing a selection results in a full page refresh.
