-
Rebuilt 1996-02 GMC Van, AM General Hummer H1 Turbo RHC6 Turbo 10241690 GM6Rebuilt H1 Hummer turbocharger. Turbo not performing like it should, down on power? We can get you to da choppa in no time with our rebuilt H1 Turbocharger!!! We require you to send us your turbo. Remanufactured Genuine IHI RHC6 Turbocharger. Comes with a...
- From
$849.00 USD - From
$849.00 USD - Unit price
- per
- From
-
Porsche 997 Turbocharger Upgrade ServiceTPC uses only the best wheel combination in all their turbos and for the 997 we are proud to release a billet compressor wheel upgrade that was inspired by the new Garrett G series compressor designs. A secret about these turbos that many...
$2,999.00 USD $2,999.00 USD - Unit price
- per
-
MAZDA SPEED 50MM UPGRADE (Service)TPC offers an upgraded turbo for the MazdaSpeed 3 and 6. Our turbo includes upgraded bearings for better reliability, an upgraded high flow OEM sized turbine wheel paired with a larger 50MM billet compressor wheel. High Speed balanced in house on our VSR balancing...
$875.00 USD $875.00 USD - Unit price
- per
-
Mazda CX-7 Turbocharger (Remanufactured)Remanufactured turbocharger for the Mazda CX-7 with the 2.3L MZR engine. We use only the highest quality parts made in the UK to rebuild your turbo. We recommend following TSB-SSP-86 from Mazda to reduce the crankcase ventilating issue these cars to increase the life of...
$805.00 USD $805.00 USD - Unit price
- per
-
Mazda Speed 3/6 Turbocharger (Remanufactured)Remanufactured turbocharger for the Mazda Speed 3 & Speed 6 with the 2.3L MZR engine. We use only the highest quality parts made in the UK to rebuild your turbo. We recommend changing gaskets and the oil feed line, in addition to a full...
$805.00 USD $805.00 USD - Unit price
- per
-
Lexus 2.0L 8AR-FTS Turbocharger (Remanufactured)TPC offers a remanufactured turbocharger for the Lexus 2.0L 8AR-FTS engine. Cleaned, rebuilt, and balanced in house, in stock ready to ship. OEM Part Number 17201-36010, 17201-36030 Compressor Wheel OEM Turbine Wheel OEM Bearing Type Options OEM Engine 2.0L 8AR-FTS Turbocharger Upgrades OEM...
$1,035.00 USD $1,035.00 USD - Unit price
- per
-
Turbine Wheel Clipping ServicesWe at TPC Inc. always try to squeeze out every ounce of airflow possible with any given design. An old and still very effective trick is clipping the turbine wheel. This is done by precisely removing material from each turbine blade to allow more exhaust...
$115.00 USD $115.00 USD - Unit price
- per
-
Turbocharger Upgrade ServiceTPC Inc. main focus is building around the “Bolt On” configuration that comes from factory mounted turbos. But we can rebuild and upgrade almost any aftermarket performance turbocharger as well. Turbo Parts Canada can upgrade any factory MHI TD04, TD05, TD06, Borg Warner series, K03,...
- From
$460.00 USD - From
$460.00 USD - Unit price
- per
- From
-
Porsche 997 Turbocharger (Remanufacturing Service)The Porsche 997 turbos are more complex than the twins found in the 996 but nothing will stop us from delivering the best product available. Our meticulous process ensures every part is restored, balanced, and properly installed with upgraded bearings for racing and OEM...
$2,299.00 USD $0.00 USD $2,299.00 USD - Unit price
- per
-
Nissan R34 Skyline 1999-2004 Turbocharger SETOur friends from Australia sent us the HKS GTIII RS turbos to play with. After a bit of R&D we built a set of R34 twin turbos that will out perform the traditional GTIII's. TPC's turbine wheel is lighter and less restrictive than OEM design....
$2,999.00 USD $2,999.00 USD - Unit price
- per
-
GM 2.0L LTG Turbocharger (Remanufactured)This listing is for a fully remanufactured turbocharger for the GM 2.0L LTG engine We installed new bearings, Seals and Gaskets and overhauled the complete turbo. There are upgrades available if you would like performance enhancements. If you are unsure of your application please...
- From
$699.00 USD - From
$699.00 USD - Unit price
- per
- From
-
Blouch / BPT Turbo Upgrade (Service)Blouch Turbo aka BPT turbos have been around for a long time. We can rebuild your journal bearing Blouch turbo. We can also upgrade from a 16g or 18g to a 20g. We can also convert your TD05 to a TD06 We can rebuild...
$699.00 USD $699.00 USD - Unit price
- per
-
BMW N20/N26 Performance TurbochargerTPC is proud to introduce the Full N20/N26 turbocharger upgrade. Other well known manufacturers only upgrade the compressor wheel and leave the turbine wheel untouched... The turbine wheel is crucial to help keep the powerband going strong in the upper RPM's. If turbine wheel...
$1,645.00 USD $1,645.00 USD - Unit price
- per
-
BOSS Turbo Rebuilds and Upgrades (Service)TPC can rebuild and upgrade any CTS BOSS turbocharger. When rebuilding your BOSS turbocharger we also install a Light Weight turbine wheel ( 9 blade G series style wheel) into your Boss turbo which will make your turbo spool approx 200 rpm's faster all...
$650.00 USD $650.00 USD - Unit price
- per
TPC 7273-3S
TPC-3S Series Turbocharger (72/73) 72mm Billet Compressor 80/73 Turbine Wheel Available in journal and ball bearing rotating assemblies. Upgraded Journal Bearing Thrust System Ceramic Duel Ball Bearing 4" Inlet with 2.5" Outlet Compressor Housing Please contact us if you have any questions or require...
- From
$850.00 USD - From
$850.00 USD - Unit price
- per
TPC 6973-3S
TPC-3S Series Turbocharger (69/73) 69mm Billet Compressor 80/73 Turbine Wheel Available in journal and ball bearing rotating assemblies. Upgraded Journal Bearing Thrust System Ceramic Duel Ball Bearing 4" Inlet with 2.5" Outlet Compressor Housing Please contact us if you have any questions or require...
- From
$850.00 USD - From
$850.00 USD - Unit price
- per
TPC 6673-3S
TPC-3S Series Turbocharger (66/73) 66mm Billet Compressor 80/73 Turbine Wheel Available in journal and ball bearing rotating assemblies. Upgraded Journal Bearing Thrust System Ceramic Duel Ball Bearing 4" Inlet with 2.5" Outlet Compressor Housing Please contact us if you have any questions or require...
- From
$850.00 USD - From
$850.00 USD - Unit price
- per
TPC 6373-3S
TPC-3S Series Turbocharger (63/73) 63mm Billet Compressor 80/73 Turbine Wheel Available in journal and ball bearing rotating assemblies. Upgraded Journal Bearing Thrust System Ceramic Duel Ball Bearing 4" Inlet with 2.5" Outlet Compressor Housing Riffled Compressor Inlet Please contact us if you have any...
- From
$850.00 USD - From
$850.00 USD - Unit price
- per
TPC-6466X GT
The TPC-6462X GT turbo has gone 8sec in a manual bolt-on DSM .63 flange turbo at 45psi! The compressor wheel is inspired from XONA and measures 64x86 mm. This 6466X unit is now paired with the standard 66mm PTE turbine wheel and is capable...
$1,190.00 USD $1,190.00 USD - Unit price
- per
- Choosing a selection results in a full page refresh.